top of page

Gen Industrial / Epoxy Primers / 604 Genepox Wash Primer

Gen Boya 604 Genepox Wash Primer ambalaj görseli

EPOXY PRIMERS · ADHESION (WASH) PRIMER

604

Genepox Wash Primer

2K · Polyvinyl butyral · Adhesion primer

Two-component polyvinyl butyral adhesion primer for galvanised steel, aluminium and steel.

A two-component, reaction-curing primer based on polyvinyl butyral (PVB) modified resin with anticorrosive pigments. It improves the adhesion of the subsequent paint system on difficult substrates, particularly non-ferrous metals.

Technical Data

LIANT

Polyvinyl butyral (PVB) modified resin

COMPOSANTS

Two-component (2K)

POSITION DANS LE SYSTÈME

Adhesion (wash) primer

DENSITÉ

0.98 ± 0.05 kg/L

EXTRAIT SEC EN VOLUME

25% ± 3

MÉTHODE D’APPLICATION

Brush, air-assisted (airmix) and airless spray

PRÉPARATION DE SURFACE

Clean, grease-free, dry surface

RENDEMENT

—

RENDEMENT

—

RENDEMENT

—

RENDEMENT

—

RENDEMENT

—

SÉCHAGE

—

CONDITIONNEMENT

15 kg kit (A+B)

TEINTE

—

DOCUMENTS TECHNIQUES

Utilisation et application

DOMAINES D’UTILISATION

Used on steel, aluminium and galvanised surfaces for corrosion protection and to improve the adhesion of subsequent topcoats.

 

PRÉPARATION DE SURFACE ET APPLICATION

Before application, remove dust, rust, oil and other contaminants and correct all surface defects. Prime within 1–2 hours of completing surface preparation. Stir components A and B separately, combine them at the specified ratio and mix with a mechanical mixer until homogeneous. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces. Apply as a thin, even film.

 

SECTEURS D’UTILISATION

→ Vehicle-Mounted Equipment, Trailers and Bodies

→ Outdoor Advertising and Signage

 

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.

POINTS FORTS

— Superior adhesion to galvanised steel and aluminium

— Effective corrosion protection in a thin film

— Adhesion bridge for subsequent coats

— Fast reaction drying

SYSTÈME RECOMMANDÉ

COUCHES SUIVANTES

Complete the system with 601 Genepox Primer, 620 Genepox Topcoat or 774 Genacryl Topcoat.

Le bon système de peinture pour votre projet, avec l’équipe technique Gen Boya.

Nos experts vous accompagnent pour le choix du système, le calcul de consommation et vos demandes de teintes RAL, de la préparation de surface à la finition.

bottom of page