Gen Industrial / Polyurethane and Acrylic Topcoats / 777 Genpoly Acr PM Topcoat
POLYURETHANE AND ACRYLIC TOPCOATS · TOPCOAT
777
Genpoly Acr PM Topcoat
2K · Aliphatic polyurethane · High solids
High-solids gloss acrylic polyurethane topcoat cured with aliphatic isocyanate.
A two-component, high-solids, gloss aliphatic polyurethane topcoat based on acrylic polyurethane resin and cured with aliphatic isocyanate. With 60% volume solids it builds a higher film thickness in fewer coats.
Technical Data
LIANT
Acrylic polyol / aliphatic isocyanate
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1.25 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
60% ± 3
BRILLANT / ASPECT
Gloss
DILUTION
018 Gen Polyurethane Thinner
MÉTHODE D’APPLICATION
Air and airless spray
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Produced on request in colours from the RAL colour chart.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used on structural steel, storage tanks, the external metal and plastic surfaces of pipes and chemical plant structures.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be clean and dry, and free from oil, grease, dust, rust, salts and any contamination that could reduce adhesion. Apply over a surface prepared with an epoxy primer or intermediate coat. Stir components A and B separately, combine them at the specified ratio and mix with a mechanical mixer until homogeneous. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces.
SECTEURS D’UTILISATION
→ Steel Structures and Structural Steel
→ Storage Tanks, Pressure Vessels and LPG Cylinders
→ Petrochemical, Refinery and Chemical Plants
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— 60% volume solids, high-build film
— For metal and plastic surfaces
— Superior UV and colour resistance
— Resistance to chemical environments
SYSTÈME RECOMMANDÉ
PRIMAIRE
601 Genepox Primer or 603 Genepox Zinc Rich Primer