Gen Industrial / Polyurethane and Acrylic Topcoats / 791 Genpur Topcoat
POLYURETHANE AND ACRYLIC TOPCOATS · TOPCOAT
791
Genpur Topcoat
2K · Polyurethane alkyd · Gloss
Two-component, isocyanate-modified polyurethane alkyd gloss topcoat.
A two-component, isocyanate-modified gloss topcoat based on polyurethane alkyd. It combines the easy application of alkyd systems with the durability of polyurethane.
Technical Data
LIANT
Polyurethane alkyd / isocyanate
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1.20 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
50% ± 3
BRILLANT / ASPECT
Gloss
DILUTION
018 Gen Polyurethane Thinner
MÉTHODE D’APPLICATION
Brush, roller, air and airless spray
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Produced on request in colours from the RAL colour chart.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used as a topcoat on exterior steel surfaces, machinery, tanks, commercial vehicles, shipyards, ports and piers.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be clean and dry, and free from oil, grease, dust, rust, salts and any contamination that could reduce adhesion. Apply over a surface primed with a suitable primer. Stir components A and B separately, combine them at the specified ratio and mix with a mechanical mixer until homogeneous. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces.
SECTEURS D’UTILISATION
→ Steel Structures and Structural Steel
→ Vehicle-Mounted Equipment, Trailers and Bodies
→ Ports, Shipyards and Coastal Structures
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Gloss, durable topcoat
— Resistance to outdoor conditions
— Easy application
— Wide range of uses: machinery, tanks, commercial vehicles
SYSTÈME RECOMMANDÉ
PRIMAIRE
601 Genepox Primer