Gen Industrial / High-Temperature Paints / 926 Gentherm Topcoat 600 °C
HIGH-TEMPERATURE PAINTS · TOPCOAT
926
Gentherm Topcoat 600 °C
1K · Silicone · 600 °C
Air-drying, heat-resistant silicone paint withstanding 600 °C dry heat.
An air-drying paint based on silicone resin that withstands dry heat up to 600 °C. It has excellent elasticity and water and corrosion resistance.
Technical Data
LIANT
Silicone resin
COMPOSANTS
Single-component (1K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1.0 ± 0.05 kg/L
EXTRAIT SEC EN VOLUME
22% ± 3
RENDEMENT THÉORIQUE
5 m²/kg (single coat)
MÉTHODE D’APPLICATION
Brush, air spray
PRÉPARATION DE SURFACE
Sa 2½ (ISO 8501-1)
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
2.2 kg · 14 kg
TEINTE
Black, Metallic Grey
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used as a protective coating on the outer surfaces of furnaces in industrial plants and the outer surfaces of hot gas ducts.
PRÉPARATION DE SURFACE ET APPLICATION
Remove all oil, rust, old paint and dirt; the ideal surface preparation is abrasive blasting to ISO 8501-1 Sa 2½. Stir thoroughly and apply in thin, even coats. Silicone paints reach their final hardness and resistance on first heating.
SECTEURS D’UTILISATION
→ Petrochemical, Refinery and Chemical Plants
→ Heating Systems, Furnaces, Chimneys and Exhausts
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— 600 °C dry heat resistance
— Excellent elasticity
— Water and corrosion resistance
— Stock colours: black and metallic grey
SYSTÈME RECOMMANDÉ
—