Gen Yacht / Woodcare and Varnishes / Nº 323 Yacht Varnish
WOODCARE AND VARNISHES · TOPCOAT VARNISH
323
Yacht Varnish
Urethane alkyd · Clear · Gloss
High-quality alkyd-based, clear and glossy yacht varnish that decorates and protects wood outdoors.
A high-quality alkyd-based, clear, glossy topcoat varnish. It gives wooden surfaces a decorative look while protecting them outdoors. It forms a hard, elastic and glossy film that resists scratching and abrasion and stands up to sunlight, seawater and atmospheric conditions.
Technical Data
LIANT
Urethane alkyd
COMPOSANTS
Single-component (1K)
POSITION DANS LE SYSTÈME
Topcoat varnish
DENSITÉ
1,0 ± 0,05 kg/L
EXTRAIT SEC EN VOLUME
%47 ± 5
BRILLANT / ASPECT
Gloss
RENDEMENT THÉORIQUE
15 m²/L (single coat, depending on wood type)
DILUTION
013 Gen Synthetic Thinner
MÉTHODE D’APPLICATION
Brush, roller, spray
NOMBRE DE COUCHES
3–5 coats on new wood
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
Dust dry 3 h · Light use 24 h · Full chemical and mechanical resistance 4 days (20 °C, 65% RH)
CONDITIONNEMENT
700 ml · 2,2 L · 12 L
TEINTE
Clear
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Wooden surfaces of yachts, boats and other marine craft; interior and exterior wood in buildings; all decorative wood exposed to sun and water.
PRÉPARATION DE SURFACE ET APPLICATION
Wood must be dry, clean and sanded. Thin the first coat by 10–15% as a sealer; apply subsequent coats unthinned, sanding lightly between coats. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
TYPES DE BATEAUX ADAPTÉS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
POINTS FORTS
— Hard, elastic, glossy film
— Resistant to seawater and sun
— Scratch and abrasion resistance
— Easy application
SYSTÈME RECOMMANDÉ
—