top of page
Gen Yacht Nº 402 Osmo Shield

UNDERWATER PRIMERS AND BARRIER SYSTEMS · BARRIER / PRIMER

402

Osmo Shield

Epoxy · Osmosis barrier · GRP

Epoxy-based, water-resistant barrier coating that minimises water ingress and protects GRP hulls against osmosis.

An epoxy-based, water-resistant protective barrier coating. By minimising water penetration it provides long-lasting protection against osmosis, especially on GRP surfaces. It is applied preventively on new boats and as a protective barrier on boats after osmosis repair.

Technical Data

LIANT

Epoxy

COMPOSANTS

Two-component (2K)

POSITION DANS LE SYSTÈME

Barrier / primer

RENDEMENT THÉORIQUE

8 m²/kg

MÉTHODE D’APPLICATION

Brush, roller, spray

NOMBRE DE COUCHES

3–5 coats for barrier effect

PRODUITS COMPATIBLES

409, 425, 427, 428

RENDEMENT

—

RENDEMENT

—

RENDEMENT

—

RENDEMENT

—

RENDEMENT

—

SÉCHAGE

Touch dry 4 h · Launch after min. 8–24 h (20 °C, 65% RH)

CONDITIONNEMENT

—

TEINTE

Grey

DOCUMENTS TECHNIQUES

Utilisation et application

DOMAINES D’UTILISATION

Underwater surfaces of GRP (fibreglass) boats; as a protective coat against osmosis; as a barrier in underwater paint systems.

 

PRÉPARATION DE SURFACE ET APPLICATION

Abrade the gelcoat to a matt finish, remove dust and wipe with solvent. On boats after osmosis repair, confirm the laminate is dry by moisture measurement. Apply coat by coat by brush, roller or spray until the required thickness is reached. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.

 

TYPES DE BATEAUX ADAPTÉS

→ Fibreglass (GRP) Boats

→ Motor Yachts and Speedboats

→ Sailing Yachts

 

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.

POINTS FORTS

— High water resistance

— Osmosis-preventing barrier

— Sound base for antifouling systems

— Epoxy durability

SYSTÈME RECOMMANDÉ

COUCHES SUIVANTES

409 Vinyl Tie Coat + Gen Antifouling (425, 427, 428)

Le bon système pour votre bateau, avec l’équipe technique Gen Yacht.

Nos experts vous accompagnent chaque saison : matériau de coque, programme de navigation, choix de l’antifouling, schéma de peinture et consommation.

bottom of page