Gen Yacht / Underwater Primers and Barrier Systems / Nº 409 Vinyl Tie Coat
UNDERWATER PRIMERS AND BARRIER SYSTEMS · TIE COAT
409
Vinyl Tie Coat
Vinyl · Tie coat · Adhesion bridge
Vinyl-modified tie coat that improves bonding between epoxy primer and antifouling for strong intercoat adhesion.
A vinyl-modified tie coat. In antifouling systems it improves bonding between the epoxy primer and the antifouling, creating strong intercoat adhesion.
Technical Data
LIANT
Vinyl-modified resin
COMPOSANTS
Single-component (1K)
POSITION DANS LE SYSTÈME
Tie coat
RENDEMENT THÉORIQUE
8 m²/kg
MÉTHODE D’APPLICATION
Brush, roller, spray
PRODUITS COMPATIBLES
401, 402, 425, 427, 428, 429
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
Touch dry 3 h · Antifouling after 6–8 h (20 °C, 65% RH)
CONDITIONNEMENT
—
TEINTE
Grey
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
As a transition coat between epoxy primer and antifouling; to improve adhesion in underwater systems; on properly prepared metal, GRP and wooden surfaces.
PRÉPARATION DE SURFACE ET APPLICATION
Apply within the overcoating interval of the epoxy primer. Stir thoroughly and apply one coat by brush, roller or spray. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
TYPES DE BATEAUX ADAPTÉS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
POINTS FORTS
— Strong bond between epoxy and antifouling
— Short overcoating time
— For metal, GRP and wood
— Extends system life
SYSTÈME RECOMMANDÉ
PRIMAIRE
401 Epoxy Primer or 402 Osmo Shield
COUCHES SUIVANTES
Gen Antifouling (425, 427, 428, 429)