Gen Marine / Tank and Special Coatings / 608 Gencoat HB Phenol
TANK AND SPECIAL COATINGS · TANK LINING
608
Gencoat HB Phenol
2K · Phenolic epoxy · Cargo tanks
Phenolic epoxy, high-solids tank lining applied at high build in a single coat for chemical and cargo tanks.
A phenolic epoxy, high-solids, high-performance tank coating for chemical tanks. It shows high resistance to a wide range of chemicals such as petroleum products, alkalis, various acids and methanol, and can be applied at high build in a single coat.
Technical Data
СВЯЗУЮЩЕЕ
Phenolic epoxy
КОМПОНЕНТЫ
Two-component (2K)
МЕСТО В СИСТЕМЕ
Tank lining
ПЛОТНОСТЬ
1,40 ± 0,1 kg/L
СУХОЙ ОСТАТОК ПО ОБЪЁМУ
%62 ± 3
ТЕОРЕТИЧЕСКИЙ РАСХОД
4,1 m²/L (150 µm DFT)
РАЗБАВЛЕНИЕ
Gen Epoxy Thinner
СПОСОБ НАНЕСЕНИЯ
Airless spray, brush (stripe coat)
ПОДГОТОВКА ПОВЕРХНОСТИ
Sa 2½ (ISO 8501-1)
КОЛИЧЕСТВО СЛОЁВ
2–3 coats (total 300 µm DFT)
РАСХОД
—
РАСХОД
—
ВЫСЫХАНИЕ
—
УПАКОВКА
—
ЦВЕТ
—
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Cargo oil tanks, fresh water tanks, holds, solvent tanks and chemical tanks.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. In tanks, remove all blasting dust and stripe-coat welds and edges separately. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ПОДХОДЯЩИЕ ЗОНЫ СУДНА
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Wide chemical resistance (petroleum products, alkalis, acids, methanol)
— High build in a single coat
— High solids
— For cargo and chemical tanks
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
—