Gen Marine / Primers and Anti-corrosive Systems / 609 Genepox Tiecoat Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · TIE COAT
609
Genepox Tiecoat Primer
2K · Modified epoxy · Under antifouling
Anti-corrosive modified epoxy primer acting as an adhesion bridge for the antifouling applied over it.
An anti-corrosive epoxy primer based on modified epoxy resin and special pigments. Besides film hardness and corrosion resistance, it especially improves the adhesion of the antifouling applied over it.
Technical Data
СВЯЗУЮЩЕЕ
Modified epoxy
КОМПОНЕНТЫ
Two-component (2K)
МЕСТО В СИСТЕМЕ
Tie coat
ПЛОТНОСТЬ
1,35 ± 0,1 kg/L
СУХОЙ ОСТАТОК ПО ОБЪЁМУ
%50 ± 3
ТЕОРЕТИЧЕСКИЙ РАСХОД
6,7 m²/L (75 µm DFT)
РАЗБАВЛЕНИЕ
Gen Epoxy Thinner
СПОСОБ НАНЕСЕНИЯ
Airless spray, brush, roller
ПОДГОТОВКА ПОВЕРХНОСТИ
Clean, dry epoxy primer
КОЛИЧЕСТВО СЛОЁВ
1 coat (75 µm DFT)
СОВМЕСТИМЫЕ ПРОДУКТЫ
603, 651
РАСХОД
—
ВЫСЫХАНИЕ
—
УПАКОВКА
—
ЦВЕТ
—
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Adhesion bridge under antifouling on maintenance and repair vessels; outer hull, deck and accommodation.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
Apply over the epoxy primer within its overcoating interval. On aged systems wash the surface, remove loose paint and roughen. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ПОДХОДЯЩИЕ ЗОНЫ СУДНА
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Adhesion bridge for antifouling
— Corrosion resistance
— Hard, durable film
— Suitable for maintenance and repair
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
ГРУНТ
603 Genepox Zinc Rich Primer or 651 Gencoat Marin
ПОСЛЕДУЮЩИЕ СЛОИ
Antifouling topcoat