Gen Anticorrosive Rapid Primer

ОБЛАСТИ ПРИМЕНЕНИЯ

Used on all metal surfaces requiring high corrosion resistance and fast drying; in machinery, equipment, vehicle-mounted equipment and steel fabrication.

ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ

The surface must be clean and dry, and free from oil, grease, dust, rust, salts and any contamination that could reduce adhesion. Metal surfaces must be abrasive blast-cleaned to at least Sa 2½ according to ISO 8501-1 and primed with Gen Anticorrosive Rapid Primer within 6 hours of blasting. Thin the product to suit the application equipment and stir until homogeneous. Apply the topcoat once the primer has dried (4–6 hours); allow 24 hours between topcoats. Application temperature: min. +10 °C / max. +30 °C. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces.

ОТРАСЛИ ПРИМЕНЕНИЯ

→ Steel Structures and Structural Steel

→ Machinery and Equipment Manufacturing

→ Vehicle-Mounted Equipment, Trailers and Bodies

→ Construction Machinery, Tractors and Agricultural Machinery

→ Drums, Metal Packaging and Metal Goods

→ Outdoor Advertising and Signage

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.