Genepox Masticoat

ОБЛАСТИ ПРИМЕНЕНИЯ

Used on new steel and on sound, previously painted surfaces prepared by water jetting or wet abrasive blasting; for maintenance painting.

ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ

The surface must be clean and dry, and free from oil, grease, dust, rust, salts and any contamination that could reduce adhesion. Prepare new steel by abrasive blasting and previously painted surfaces by water jetting or wet abrasive blasting; remove loose and blistered old paint. Stir components A and B separately, combine them at the specified ratio and mix with a mechanical mixer until homogeneous. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces.

ОТРАСЛИ ПРИМЕНЕНИЯ

→ Steel Structures and Structural Steel

→ Ports, Shipyards and Coastal Structures

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.