Gen Yacht / Antifouling Paints / Nº 425 Evolution
ANTIFOULING PAINTS · ANTIFOULING TOPCOAT
425
Evolution
Tin-free · Self-polishing · Marina and offshore
Tin-free, self-polishing antifouling that reduces friction for better fuel efficiency and a long service life.
A tin-free, self-polishing antifouling. It prevents marine organisms from attaching to the hull while reducing friction, contributing to fuel efficiency and a long service life. The film wears away in a controlled way while the boat is moving, providing a continuously active surface throughout the season.
Technical Data
СВЯЗУЮЩЕЕ
Self-polishing copolymer resin
КОМПОНЕНТЫ
Single-component (1K)
МЕСТО В СИСТЕМЕ
Antifouling topcoat
ТЕОРЕТИЧЕСКИЙ РАСХОД
6 m²/kg (single coat)
РАЗБАВЛЕНИЕ
Gen Antifouling Thinner
СПОСОБ НАНЕСЕНИЯ
Brush, roller, spray
ПОДГОТОВКА ПОВЕРХНОСТИ
Clean, dry surface prepared with a suitable primer / tie coat
КОЛИЧЕСТВО СЛОЁВ
Min. 2 coats; extra coat at waterline, keel and rudder leading edges
СОВМЕСТИМЫЕ ПРОДУКТЫ
402, 401, 409, 424
РАСХОД
—
РАСХОД
—
РАСХОД
—
ВЫСЫХАНИЕ
Touch dry 3 h · Recoat 8 h · Launch after min. 12–24 h (20 °C, 65% RH)
УПАКОВКА
—
ЦВЕТ
Red, Brown, Jet Black
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Underwater surfaces of fibreglass (GRP), wooden and steel boats; yachts and boats in marina and offshore conditions; to prevent fouling by marine organisms, algae and barnacles.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
On new GRP boats, remove mould release agent residues with a suitable surface cleaner and abrade to a matt finish. On previously antifouled surfaces, wash with high-pressure fresh water, scrape off loose and flaking paint, and make sure the surface is dry, clean and grease-free. Over an antifouling of unknown compatibility, apply 424 Underwater Sealer as an isolating coat. Stir thoroughly before use and apply at least two coats by brush, roller or spray. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
ПОДХОДЯЩИЕ ТИПЫ СУДОВ
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Tin-free (TBT-free) and cybutryne-free formula
— Self-polishing film
— Low friction for better fuel efficiency
— IMO AFS 2001 compliant, Turkish Lloyd certified
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
ГРУНТ
GRP: 402 Osmo Shield or 401 Epoxy Primer + 409 Vinyl Tie Coat · Old antifouling: 424 Underwater Sealer