Gen Yacht / Antifouling Paints / Nº 427 Speed
ANTIFOULING PAINTS · ANTIFOULING TOPCOAT
427
Speed
Hard film · High speed · Performance boats
Hard antifouling that minimises performance and speed loss with low frictional resistance on fast boats.
A hard antifouling. It provides low frictional resistance on fast boats, minimising performance and speed loss. Its hard surface resists erosion at high water flow and frequent use, and can be burnished when required.
Technical Data
СВЯЗУЮЩЕЕ
Hard antifouling resin
КОМПОНЕНТЫ
Single-component (1K)
МЕСТО В СИСТЕМЕ
Antifouling topcoat
ТЕОРЕТИЧЕСКИЙ РАСХОД
6 m²/kg (single coat)
РАЗБАВЛЕНИЕ
Gen Antifouling Thinner
СПОСОБ НАНЕСЕНИЯ
Brush, roller, spray
ПОДГОТОВКА ПОВЕРХНОСТИ
Clean, dry surface prepared with a suitable primer / tie coat
КОЛИЧЕСТВО СЛОЁВ
Min. 2 coats; extra coat at waterline, keel and rudder leading edges
СОВМЕСТИМЫЕ ПРОДУКТЫ
402, 401, 409, 424
РАСХОД
—
РАСХОД
—
РАСХОД
—
ВЫСЫХАНИЕ
Touch dry 3 h · Recoat 8 h · Launch after min. 12–24 h (20 °C, 65% RH)
УПАКОВКА
—
ЦВЕТ
Jet Black, Navy Blue
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Underwater surfaces of steel, wooden and fibreglass (GRP) boats; fast motor yachts and performance boats; underwater applications requiring a hard film.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
On new GRP boats, remove mould release agent residues with a suitable surface cleaner and abrade to a matt finish. On previously antifouled surfaces, wash with high-pressure fresh water, scrape off loose and flaking paint, and make sure the surface is dry, clean and grease-free. Over an antifouling of unknown compatibility, apply 424 Underwater Sealer as an isolating coat. Stir thoroughly and apply at least two coats by brush, roller or spray. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
ПОДХОДЯЩИЕ ТИПЫ СУДОВ
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Hard, erosion-resistant film
— Low frictional resistance
— Keeps performance at high speed
— Tin-free (TBT-free) formula
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
ГРУНТ
GRP: 402 Osmo Shield or 401 Epoxy Primer + 409 Vinyl Tie Coat · Old antifouling: 424 Underwater Sealer