Gen Yacht / Antifouling Paints / Nº 428 Snow
ANTIFOULING PAINTS · ANTIFOULING TOPCOAT
428
Snow
Light colour · Aesthetic · Strong biological protection
Antifouling for light-coloured schemes that combines a clean appearance with strong biological protection.
An antifouling designed for light-coloured schemes. Besides its aesthetic appearance, it provides strong biological protection for clean, long-lasting surfaces and matches white and light grey hulls elegantly at the waterline.
Technical Data
СВЯЗУЮЩЕЕ
Antifouling resin
КОМПОНЕНТЫ
Single-component (1K)
МЕСТО В СИСТЕМЕ
Antifouling topcoat
ТЕОРЕТИЧЕСКИЙ РАСХОД
6 m²/kg (single coat)
РАЗБАВЛЕНИЕ
Gen Antifouling Thinner
СПОСОБ НАНЕСЕНИЯ
Brush, roller, spray
ПОДГОТОВКА ПОВЕРХНОСТИ
Clean, dry surface prepared with a suitable primer / tie coat
КОЛИЧЕСТВО СЛОЁВ
Min. 2 coats; extra coat at waterline, keel and rudder leading edges
СОВМЕСТИМЫЕ ПРОДУКТЫ
402, 401, 409, 424
РАСХОД
—
РАСХОД
—
РАСХОД
—
ВЫСЫХАНИЕ
Touch dry 3 h · Recoat 8 h · Launch after min. 12–24 h (20 °C, 65% RH)
УПАКОВКА
—
ЦВЕТ
Traffic White, Light Grey
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Underwater surfaces of fibreglass (GRP), wooden and metal boats; light-coloured antifouling schemes; underwater surfaces of yachts and boats where appearance matters.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
On new GRP boats, remove mould release agent residues with a suitable surface cleaner and abrade to a matt finish. On previously antifouled surfaces, wash with high-pressure fresh water, scrape off loose and flaking paint, and make sure the surface is dry, clean and grease-free. Over an antifouling of unknown compatibility, apply 424 Underwater Sealer as an isolating coat. Stir thoroughly and apply at least two coats by brush, roller or spray. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
ПОДХОДЯЩИЕ ТИПЫ СУДОВ
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— White and light grey colours
— Strong biological protection
— Clean, aesthetic underwater appearance
— Tin-free (TBT-free) formula
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
ГРУНТ
GRP: 402 Osmo Shield or 401 Epoxy Primer + 409 Vinyl Tie Coat · Old antifouling: 424 Underwater Sealer