Gen Yacht / Antifouling Paints / Nº 429 Crystal
ANTIFOULING PAINTS · ANTIFOULING TOPCOAT
429
Crystal
Copper-free · Aluminium hulls · Saildrive
Copper-free antifouling that minimises the risk of galvanic corrosion on aluminium hulls and sensitive metal surfaces.
A special copper-free antifouling. It is safe on aluminium hulls and sensitive metal surfaces and provides long-lasting protection while minimising the risk of galvanic corrosion.
Technical Data
СВЯЗУЮЩЕЕ
Copper-free antifouling resin
КОМПОНЕНТЫ
Single-component (1K)
МЕСТО В СИСТЕМЕ
Antifouling topcoat
ТЕОРЕТИЧЕСКИЙ РАСХОД
6 m²/kg (single coat)
РАЗБАВЛЕНИЕ
Gen Antifouling Thinner
СПОСОБ НАНЕСЕНИЯ
Brush, roller, spray
ПОДГОТОВКА ПОВЕРХНОСТИ
Clean, dry surface prepared with a suitable primer / tie coat
КОЛИЧЕСТВО СЛОЁВ
Min. 2 coats; extra coat at waterline, keel and rudder leading edges
СОВМЕСТИМЫЕ ПРОДУКТЫ
402, 401, 409, 424
РАСХОД
—
РАСХОД
—
РАСХОД
—
ВЫСЫХАНИЕ
Touch dry 3 h · Recoat 8 h · Launch after min. 12–24 h (20 °C, 65% RH)
УПАКОВКА
—
ЦВЕТ
Jet Black, Navy Blue
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Underwater surfaces of aluminium-hulled boats; around saildrives and outboard engines; galvanically sensitive metal surfaces; yachts and boats requiring a copper-free system.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
Abrade aluminium surfaces, degrease with solvent, prime with at least three coats of 401 Epoxy Primer and apply 409 Vinyl Tie Coat. Stir thoroughly and apply at least two coats by brush, roller or spray. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
ПОДХОДЯЩИЕ ТИПЫ СУДОВ
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Copper-free
— Safe on aluminium and sensitive metals
— Reduces galvanic corrosion risk
— Suitable around saildrives and outboards
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
ГРУНТ
Aluminium: 401 Epoxy Primer (min. 3 coats) + 409 Vinyl Tie Coat