Gen Marine / Primers and Anti-corrosive Systems / 601 Genepox Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · ANTI-CORROSIVE PRIMER
601
Genepox Primer
2K · Epoxy · Zinc phosphate
Two-component, high-solids epoxy anti-corrosive primer with zinc phosphate and excellent adhesion.
A two-component, epoxy-based, high-solids anti-rust primer containing zinc phosphate. It has excellent adhesion and is used on steel structures, machinery and especially where heavy industrial or marine atmospheres demand high corrosion resistance.
Technical Data
LIGANTE
Epoxy
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Anti-corrosive primer
DENSIDAD
1,45 ± 0,1 kg/L
SÓLIDOS EN VOLUMEN
%65 ± 3
RENDIMIENTO TEÓRICO
8 m²/kg (7–8 m²/kg @ 60 µm DFT)
PROPORCIÓN DE MEZCLA
By weight 7 : 1 (A : B)
DILUCIÓN
%10–15, 016 Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Brush, roller, havalı (airmix) and airless sprey
PREPARACIÓN DE SUPERFICIE
Sa 2½ (ISO 8501-1)
PRODUCTOS COMPATIBLES
620, 623, 776
RENDIMIENTO
—
SECADO
Touch dry 3–4 h · Üst coats en az 18 h · Mekanik dayanım 4–6 days
ENVASE
3 kg set (2,625 kg A + 0,375 kg B) · 20 kg set (17,5 kg A + 2,5 kg B)
COLOR
RAL renk kartelasındaki renklerde, talep üzerine üretilir.
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Hull, deck, hold and superstructure steel; offshore and port structures; steel structures, machinery and equipment exposed to heavy marine atmosphere.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. Mix components A and B mechanically and apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Zinc phosphate anti-corrosive pigment
— Excellent adhesion
— High solids
— Compatible with epoxy and polyurethane topcoats
SISTEMA RECOMENDADO
CAPAS SIGUIENTES
620 Genepox Topcoat, 623 Genepox Finish Marine or 776 Genpoly ACR Topcoat Marin