Gen Marine / Primers and Anti-corrosive Systems / 603 Genepox Zinc Rich Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · ZINC-RICH PRIMER
603
Genepox Zinc Rich Primer
2K · Zinc-rich epoxy · Cathodic protection
Two-component zinc-rich epoxy primer with pure micronised zinc dust providing cathodic protection.
A two-component anti-corrosive primer containing pure micronised zinc dust that provides cathodic protection. It is used for priming steel exposed to water, seawater, chemicals and abrasion, in shipbuilding and marine applications, and on underwater hull surfaces.
Technical Data
LIGANTE
Epoxy
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Zinc-rich primer
DENSIDAD
2,10 ± 0,1 kg/L
SÓLIDOS EN VOLUMEN
%52 ± 3
RENDIMIENTO TEÓRICO
5 m²/kg (single coat)
PROPORCIÓN DE MEZCLA
By weight 9 : 1 (A : B)
DILUCIÓN
016 Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Sprey
PREPARACIÓN DE SUPERFICIE
Sa 2½ (ISO 8501-1)
PRODUCTOS COMPATIBLES
606, 651, 776
RENDIMIENTO
—
SECADO
—
ENVASE
20 kg set (18 kg A + 2 kg B)
COLOR
Çinko grisi
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Priming of steel exposed to water, seawater, chemicals and abrasion; newbuilding and ship repair; underwater hull surfaces and areas requiring high corrosion resistance.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. Keep the zinc-rich component in suspension by continuous stirring; apply by airless spray. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONAS DEL BUQUE ADECUADAS
→ Offshore and Port Structures
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Cathodic protection with zinc dust
— High corrosion resistance
— For newbuilding and repair
— Base for epoxy and PU systems
SISTEMA RECOMENDADO
CAPAS SIGUIENTES
606 Genepox SX HS intermediate + 776 Genpoly ACR Topcoat Marin; underwater 651 Gencoat Marin