Gen Marine / Primers and Anti-corrosive Systems / 605 Genepox Fast Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · PRIMER / TOPCOAT
605
Genepox Fast Primer
2K · Fast drying · On-board maintenance
Multi-purpose, surface-tolerant, fast-drying primer/topcoat compatible with all topcoats; ideal for on-board maintenance.
A multi-purpose, surface-tolerant primer/topcoat. As all topcoats can be applied over it, it is an ideal on-board primer. Its fast drying allows maintenance at sea and during short port stays.
Technical Data
LIGANTE
Modified epoxy
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Primer / topcoat
DENSIDAD
1,45 ± 0,1 kg/L
SÓLIDOS EN VOLUMEN
%65 ± 3
RENDIMIENTO TEÓRICO
6,5 m²/L (100 µm DFT)
DILUCIÓN
Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Airless spray, brush, roller
PREPARACIÓN DE SUPERFICIE
St 2–St 3 or Sa 2
NÚMERO DE CAPAS
1–2 coats
PRODUCTOS COMPATIBLES
623, 769, 776
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
—
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Decks, holds, hatch covers and other steel structures requiring fast drying; submerged areas, accommodation and ballast tanks; sound aged coatings of various types.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Remove salts, grease and loose rust; clean to St 2–St 3 or blast to Sa 2. Abrade sound old coatings. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONAS DEL BUQUE ADECUADAS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Fast drying, short maintenance time
— Surface tolerant
— Compatible with all topcoats
— Use as primer or topcoat
SISTEMA RECOMENDADO
CAPAS SIGUIENTES
623 Genepox Finish Marine, 776 Genpoly ACR Topcoat Marin or 769 Genacryl Finish