Gen Marine / Tank and Special Coatings / 608 Gencoat HB Phenol
TANK AND SPECIAL COATINGS · TANK LINING
608
Gencoat HB Phenol
2K · Phenolic epoxy · Cargo tanks
Phenolic epoxy, high-solids tank lining applied at high build in a single coat for chemical and cargo tanks.
A phenolic epoxy, high-solids, high-performance tank coating for chemical tanks. It shows high resistance to a wide range of chemicals such as petroleum products, alkalis, various acids and methanol, and can be applied at high build in a single coat.
Technical Data
LIGANTE
Phenolic epoxy
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Tank lining
DENSIDAD
1,40 ± 0,1 kg/L
SÓLIDOS EN VOLUMEN
%62 ± 3
RENDIMIENTO TEÓRICO
4,1 m²/L (150 µm DFT)
DILUCIÓN
Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Airless spray, brush (stripe coat)
PREPARACIÓN DE SUPERFICIE
Sa 2½ (ISO 8501-1)
NÚMERO DE CAPAS
2–3 coats (total 300 µm DFT)
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
—
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Cargo oil tanks, fresh water tanks, holds, solvent tanks and chemical tanks.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. In tanks, remove all blasting dust and stripe-coat welds and edges separately. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONAS DEL BUQUE ADECUADAS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Wide chemical resistance (petroleum products, alkalis, acids, methanol)
— High build in a single coat
— High solids
— For cargo and chemical tanks
SISTEMA RECOMENDADO
—