Gen Marine / Primers and Anti-corrosive Systems / 609 Genepox Tiecoat Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · TIE COAT
609
Genepox Tiecoat Primer
2K · Modified epoxy · Under antifouling
Anti-corrosive modified epoxy primer acting as an adhesion bridge for the antifouling applied over it.
An anti-corrosive epoxy primer based on modified epoxy resin and special pigments. Besides film hardness and corrosion resistance, it especially improves the adhesion of the antifouling applied over it.
Technical Data
LIGANTE
Modified epoxy
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Tie coat
DENSIDAD
1,35 ± 0,1 kg/L
SÓLIDOS EN VOLUMEN
%50 ± 3
RENDIMIENTO TEÓRICO
6,7 m²/L (75 µm DFT)
DILUCIÓN
Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Airless spray, brush, roller
PREPARACIÓN DE SUPERFICIE
Clean, dry epoxy primer
NÚMERO DE CAPAS
1 coat (75 µm DFT)
PRODUCTOS COMPATIBLES
603, 651
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
—
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Adhesion bridge under antifouling on maintenance and repair vessels; outer hull, deck and accommodation.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Apply over the epoxy primer within its overcoating interval. On aged systems wash the surface, remove loose paint and roughen. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONAS DEL BUQUE ADECUADAS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Adhesion bridge for antifouling
— Corrosion resistance
— Hard, durable film
— Suitable for maintenance and repair
SISTEMA RECOMENDADO
IMPRIMACIÓN
603 Genepox Zinc Rich Primer or 651 Gencoat Marin
CAPAS SIGUIENTES
Antifouling topcoat