Gen Marine / Intermediates and Topcoats / 651 Gencoat Marin
INTERMEDIATES AND TOPCOATS · PRIMER / TOPCOAT
651
Gencoat Marin
2K · Epoxy · Immersion service
Multi-purpose, surface-tolerant epoxy primer/topcoat; ideal for immersion service and repair work on board.
A two-component, epoxy-based, multi-purpose and surface-tolerant marine primer/topcoat with excellent adhesion and hardness, ideal for repair work on board.
Technical Data
LIGANTE
Epoxy
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Primer / topcoat
DENSIDAD
1,30 ± 0,05 kg/L
SÓLIDOS EN VOLUMEN
%65 ± 2
RENDIMIENTO TEÓRICO
5,2 m²/L (125 µm DFT)
DILUCIÓN
Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Airless spray, brush, roller
PREPARACIÓN DE SUPERFICIE
Sa 2½ or St 3
NÚMERO DE CAPAS
2 coats (2 × 125 µm DFT)
PRODUCTOS COMPATIBLES
603, 609
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
—
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Decks, holds, hatch covers, other steel structures and underwater areas; immersion service on ships, barges, port facilities and offshore structures.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. Mix A and B and apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONAS DEL BUQUE ADECUADAS
→ Offshore and Port Structures
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Resistant to immersion
— Surface tolerant
— Use as primer and topcoat
— Ideal for repair and maintenance
SISTEMA RECOMENDADO
CAPAS SIGUIENTES
Underwater: 609 Genepox Tiecoat Primer + antifouling