Gen Marine / Tank and Special Coatings / 673 Gencoat Pipe
TANK AND SPECIAL COATINGS · TANK LINING
673
Gencoat Pipe
2K · Solvent-free epoxy · Potable water
Solvent-free, benzyl-alcohol-free hygienic epoxy for fresh water tanks and potable water pipes.
A two-component, solvent-free, epoxy-based hygienic coating. It contains no benzyl alcohol and gives a smooth, glossy surface.
Technical Data
LIGANTE
Solvent-free epoxy
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Tank lining
DENSIDAD
1,28 ± 0,1 kg/L
SÓLIDOS EN VOLUMEN
~%100
RENDIMIENTO TEÓRICO
4,0 m²/L (250 µm DFT)
MÉTODO DE APLICACIÓN
Airless spray, brush
PREPARACIÓN DE SUPERFICIE
Sa 2½ (ISO 8501-1)
NÚMERO DE CAPAS
1–2 coats
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
—
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Fresh water tanks of boats and ships; especially potable water pipes and tanks; cooling water pipelines of power plants, sewage pipelines and steel structures of petrochemical plants.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. Mix A and B mechanically and apply by airless spray or brush. Fully cure and rinse the tank before service. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONAS DEL BUQUE ADECUADAS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Solvent-free, no benzyl alcohol
— Hygienic, smooth and glossy surface
— For potable water tanks
— High film build
SISTEMA RECOMENDADO
—