Gen Marine / Primers and Anti-corrosive Systems / 710 Genacryl Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · PRIMER
710
Genacryl Primer
1K · Acrylic · MIO pigmented
Fast-drying modified acrylic anti-corrosive primer with micaceous iron oxide (MIO) for topsides and superstructure steel.
A modified acrylic anti-corrosive primer containing micaceous iron oxide (MIO). Fast drying, it can be applied directly on cleaned steel or over acrylic-epoxy coatings.
Technical Data
LIGANTE
Modified acrylic
COMPONENTES
Single-component (1K)
POSICIÓN EN EL SISTEMA
Primer
DENSIDAD
1,00 ± 0,05 kg/L
SÓLIDOS EN VOLUMEN
%50 ± 3
RENDIMIENTO TEÓRICO
8,3 m²/L (60 µm DFT)
MÉTODO DE APLICACIÓN
Airless spray, brush, roller
PREPARACIÓN DE SUPERFICIE
St 3 or Sa 2½
NÚMERO DE CAPAS
1–2 coats
PRODUCTOS COMPATIBLES
769
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
—
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Primer for abrasion and corrosion protection on topsides, accommodation and other superstructure steel; suitable for all wooden, fibreglass and steel boats.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The surface must be clean, dry and free of grease and salts; St 3 or Sa 2½ preparation is recommended. Apply by brush, roller or airless spray. Steel temperature must be at least 3 °C above the dew point.
ZONAS DEL BUQUE ADECUADAS
→ Superstructure and Accommodation
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
CARACTERÍSTICAS PRINCIPALES
— Barrier protection with MIO
— Fast drying
— Can be applied over acrylic and epoxy coatings
— For steel, wood and fibreglass
SISTEMA RECOMENDADO
CAPAS SIGUIENTES
769 Genacryl Finish