top of page
Gen Yacht Nº 402 Osmo Shield

UNDERWATER PRIMERS AND BARRIER SYSTEMS · BARRIER / PRIMER

402

Osmo Shield

Epoxy · Osmosis barrier · GRP

Epoxy-based, water-resistant barrier coating that minimises water ingress and protects GRP hulls against osmosis.

An epoxy-based, water-resistant protective barrier coating. By minimising water penetration it provides long-lasting protection against osmosis, especially on GRP surfaces. It is applied preventively on new boats and as a protective barrier on boats after osmosis repair.

Technical Data

LIGANTE

Epoxy

COMPONENTES

Two-component (2K)

POSICIÓN EN EL SISTEMA

Barrier / primer

RENDIMIENTO TEÓRICO

8 m²/kg

MÉTODO DE APLICACIÓN

Brush, roller, spray

NÚMERO DE CAPAS

3–5 coats for barrier effect

PRODUCTOS COMPATIBLES

409, 425, 427, 428

RENDIMIENTO

—

RENDIMIENTO

—

RENDIMIENTO

—

RENDIMIENTO

—

RENDIMIENTO

—

SECADO

Touch dry 4 h · Launch after min. 8–24 h (20 °C, 65% RH)

ENVASE

—

COLOR

Grey

DOCUMENTOS TÉCNICOS

Uso y aplicación

USOS

Underwater surfaces of GRP (fibreglass) boats; as a protective coat against osmosis; as a barrier in underwater paint systems.

 

PREPARACIÓN DE SUPERFICIE Y APLICACIÓN

Abrade the gelcoat to a matt finish, remove dust and wipe with solvent. On boats after osmosis repair, confirm the laminate is dry by moisture measurement. Apply coat by coat by brush, roller or spray until the required thickness is reached. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.

 

TIPOS DE EMBARCACIÓN ADECUADOS

→ Fibreglass (GRP) Boats

→ Motor Yachts and Speedboats

→ Sailing Yachts

 

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.

CARACTERÍSTICAS PRINCIPALES

— High water resistance

— Osmosis-preventing barrier

— Sound base for antifouling systems

— Epoxy durability

SISTEMA RECOMENDADO

CAPAS SIGUIENTES

409 Vinyl Tie Coat + Gen Antifouling (425, 427, 428)

El sistema adecuado para su embarcación, con el equipo técnico de Gen Yacht.

Nuestros expertos le acompañan cada temporada con el material del casco, el perfil de navegación, la elección del antiincrustante, el esquema de pintura y el consumo.

bottom of page