Gen Yacht / Underwater Primers and Barrier Systems / Nº 409 Vinyl Tie Coat
UNDERWATER PRIMERS AND BARRIER SYSTEMS · TIE COAT
409
Vinyl Tie Coat
Vinyl · Tie coat · Adhesion bridge
Vinyl-modified tie coat that improves bonding between epoxy primer and antifouling for strong intercoat adhesion.
A vinyl-modified tie coat. In antifouling systems it improves bonding between the epoxy primer and the antifouling, creating strong intercoat adhesion.
Technical Data
LIGANTE
Vinyl-modified resin
COMPONENTES
Single-component (1K)
POSICIÓN EN EL SISTEMA
Tie coat
RENDIMIENTO TEÓRICO
8 m²/kg
MÉTODO DE APLICACIÓN
Brush, roller, spray
PRODUCTOS COMPATIBLES
401, 402, 425, 427, 428, 429
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
Touch dry 3 h · Antifouling after 6–8 h (20 °C, 65% RH)
ENVASE
—
COLOR
Grey
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
As a transition coat between epoxy primer and antifouling; to improve adhesion in underwater systems; on properly prepared metal, GRP and wooden surfaces.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Apply within the overcoating interval of the epoxy primer. Stir thoroughly and apply one coat by brush, roller or spray. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
TIPOS DE EMBARCACIÓN ADECUADOS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
CARACTERÍSTICAS PRINCIPALES
— Strong bond between epoxy and antifouling
— Short overcoating time
— For metal, GRP and wood
— Extends system life
SISTEMA RECOMENDADO
IMPRIMACIÓN
401 Epoxy Primer or 402 Osmo Shield
CAPAS SIGUIENTES
Gen Antifouling (425, 427, 428, 429)