Gen Yacht / Antifouling Paints / Nº 429 Crystal
ANTIFOULING PAINTS · ANTIFOULING TOPCOAT
429
Crystal
Copper-free · Aluminium hulls · Saildrive
Copper-free antifouling that minimises the risk of galvanic corrosion on aluminium hulls and sensitive metal surfaces.
A special copper-free antifouling. It is safe on aluminium hulls and sensitive metal surfaces and provides long-lasting protection while minimising the risk of galvanic corrosion.
Technical Data
LIGANTE
Copper-free antifouling resin
COMPONENTES
Single-component (1K)
POSICIÓN EN EL SISTEMA
Antifouling topcoat
RENDIMIENTO TEÓRICO
6 m²/kg (single coat)
DILUCIÓN
Gen Antifouling Thinner
MÉTODO DE APLICACIÓN
Brush, roller, spray
PREPARACIÓN DE SUPERFICIE
Clean, dry surface prepared with a suitable primer / tie coat
NÚMERO DE CAPAS
Min. 2 coats; extra coat at waterline, keel and rudder leading edges
PRODUCTOS COMPATIBLES
402, 401, 409, 424
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
Touch dry 3 h · Recoat 8 h · Launch after min. 12–24 h (20 °C, 65% RH)
ENVASE
—
COLOR
Jet Black, Navy Blue
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Underwater surfaces of aluminium-hulled boats; around saildrives and outboard engines; galvanically sensitive metal surfaces; yachts and boats requiring a copper-free system.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Abrade aluminium surfaces, degrease with solvent, prime with at least three coats of 401 Epoxy Primer and apply 409 Vinyl Tie Coat. Stir thoroughly and apply at least two coats by brush, roller or spray. Air and surface temperature must be above +5 °C and relative humidity below 85%; surface temperature must be at least 3 °C above the dew point.
TIPOS DE EMBARCACIÓN ADECUADOS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for a paint schedule tailored to your boat.
CARACTERÍSTICAS PRINCIPALES
— Copper-free
— Safe on aluminium and sensitive metals
— Reduces galvanic corrosion risk
— Suitable around saildrives and outboards
SISTEMA RECOMENDADO
IMPRIMACIÓN
Aluminium: 401 Epoxy Primer (min. 3 coats) + 409 Vinyl Tie Coat